Griffin Armament EZ-LOK Barrel Adapter - .578x28

The EZ-LOK™ is our new patent pending, separate eco-system, separately available, simplified, universal Rapid Index™, piston system. EZ-LOK™ is comprised of two parts, the piston, and the barrel adapter. This product page is for the barrel adapter (smaller black component pictured). This product was intended to provide a simple solution with zero training or familiarity requirement for customers. CAM-LOK® is our original and still higher performance, patent pending product in the pistol silencer piston mount product class that Griffin Armament created.

The Griffin Armament EZ-LOK™ interface affords the user the ability to convert the suppressor to a much faster and more secure mounting solution on browning style action (tilt barrel) pistols vs it's legacy technology, single piece, direct thread piston counterparts. Direct thread single piece pistons have several negative attributes. They do not accept tools, and are hand tightened to the host firearm. As a result of hand installation, they loosen when the piston system reciprocates under slide cycling during the firing sequence. This vibration and inadvertent loosening of pistol silencers, requires end users to constantly check tighten pistol silencers. This periodically causes users to have "bad range days" with unforeseen baffle strikes and end cap strikes. These unfortunate events cause logistically burdensome work for consumers to communicate with service departments, ship products back and forth, and sometimes assume charges for repair for these issues.

No longer do users need to worry about their pistol suppressors loosening during use (as with traditional fixed direct thread pistons). The EZ-LOK™ interface supports a 3/4" socket wrench for installation with prevailing torque, and features a taper locking system, which encourages secure attachment, despite the piston still actuating for and aft during the firing sequence. The piston can be attached / detached in one single mounting orientation, simplifying the system to something anyone who can screw in a lightbulb can immediately grasp.  Additionally, the manufacturing accuracy of the interface is held to Griffin Armament's high quality standards for squareness, and concentricity, ensuring that each mounting position has similar and minimal POI shift influence. To support this, the mating pistons and EZ-LOK™ direct thread adapters have all mating diameters and interfacing geometry qualified in a single operation, for tool quality accuracy and perfection. A similar manufacturing theory was applied to the barrel adapter for maximum alignment accuracy.

End users benefit from being able to attach their silencer to various adapter interfaced host firearms, without having to disassemble the suppressor and change the piston to a different thread pitch.  The piston is "universal"; accommodating any pistol mounted with a EZ-LOK™ barrel adapter. Additionally, end users with different brand suppressors supported by the EZ-LOK™ piston family, will be able to benefit from the interchangeability of EZ-LOK™ barrel adapters between EZ-LOK™ piston models. This adapter also acts as a thread protector for the more expensive barrel's threads which when used with fixed pistons, are traditionally exposed.

9mm versions are shorter, .45 caliber versions feature an extended cylinder to attach to the larger diameter barrels.

Installation & Use Notes  : Suppressor should be tightly assembled when using this product to avoid inadvertent disassembly of the suppressor when removing it from barrel adapter. Barrel adapters should be installed to their host firearms with a minimum torque rating of 22 ft/lbs using a 3/4 socket and needle type torque wrench.  Use of a box end wrench will not have optimal contact with the wrench flat geometry on the adapter and may damage the adapter.

CAM-LOK® requires suppressor attachment with minimum 22inch lbs of force.  EZ-LOK™ requires suppressor attachment with minimum 13.75inch lbs of force.  With both systems, a slight squish should be felt during tightening and indicates tapers are engaged (locked), and required installation torque has been met.

For the fastest system, choose CAM-LOK®.  For the the most simple system, choose EZ-LOK™.

Features :

• Patent Pending EZ-LOK™ universal QD piston attachment system
• 1 Mounting orientation, for simple mounting in approximately 4-5 seconds
• Internal taper surface locks in place with interfacing barrel adapters and drastically reduces or eliminates common baffle/end cap strikes
• Compatible with Universal QD pistons barrel adapters (sold separately)
• Total system weight is identical to legacy direct thread pistons
• H900 heat treated for improved durability and wear resistance
• 17-4 stainless steel material
• QPQ Nitride finish for attractive, durable black finish